Benchmade Adamas Knife Review for 2020: Survival Gear Hands-On

It is a long held belief that a folding knife can never possess the strength to solo as a survival knife. The fears of a folding blade includes that Best Survival Knifethey are too short, have a weak pivot point, and any locking mechanism simply cannot be strong enough. A significant challenge to the sub-standard folder belief arrived with the Benchmade 275 Adamas.  The Sibert Designed Adamas folder has a 3.8 inch blade of D2 steel that’s a full 0.16 inches thick. But what sets the 275 apart from not only other Benchmades, but from all other knives in this category is that the Adamas has the strongest Axis Lock ever made which says a lot given the incredible strength of the regular Benchmade Axis mechanism.

Benchmade Adamas Review: Hands-On

A Pair of Diamonds for the Rough

In a laboratory stress test the Benchmade 275 Adamas withstood over 1600 inch-pounds (that’sHow to buy a survival knife 143 foot-pounds) of torque, and over half-an-inch of deflection before failure. A more understandable force would be to consider the lever distance of approximately two inches from the Axis lock and a force number of over 800 pounds is conceivable. Those numbers are impressive, not just for folders but for many fixed blades as well.

At 7.7 ounces, the the Adamas is probably the heaviest lightweight knife you could carry without ripping your pocket off. The faintly textured G10 scales saved some mass so the balance point of this knife lands directly on your index finger. And with a handle thickness just under three-fourths of an inch, when deployed the Adamas 275 feels just like a fixed blade.

Benchmade - Adamas 275 Knife, Plain Drop-Point, Black Handle
  • HIGH-QUALITY: The D2 stainless steel blade holds an edge exceptionally well. The G10 handle is...
  • WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Adamas 275...

Last update on 2020-07-06 at 14:28 / Affiliate links / Images from Amazon Product Advertising API

A Show of Force

Bread and Butter

For such a beefy folder, something that must be experienced to be believed is just how smooth the blade swings especially with the “Axis lockBest Survival Knife flip” where the Axis bar is pulled back and the momentum of the blade carries to it attention with a slight flick of the wrist. Buttery smooth is a common description, but the magic is in the polished metal and a pair of phosphor bronze washers that patrol the border between blade and grip with icy precision. In fact, the mechanism is so silky, and the blade so massive, that you can deploy the blade to full attention without releasing the Axis lock; just a firm downward shake on the handle followed by an upward jerk to seat the blade.

Jimping appears on all sides near the corners as well as the back spine of the blade. The handle Best Survival Knifehas a slight guard built into the scale shape at the front, and another curve encloses the back of the grip.  As more of a survival/fighting knife, the most common ways to grip this blade will be the forward and the reverse grip with while keeping the spine against the palm.  A short fuller or so-called blood grove hovers in the upper center of the grip-side of the blade and just under the Benchmade Butterfly. While the fuller’s diminutive size saved little weight, it was more likely added for strength and to breakup the significant amount of otherwise bland blade D2 real estate.


Unfortunately Benchmade retained their usual pocket clip.  That’s like putting a one-inch hitch receiver on your Ford 350 Super Best Survival KnifeDuty pickup.  Why would a near-eight ounce Benchmade beast have the same sized pocket clip as a two-ounce folder?  Maybe it is a cost issue but I would hope that they would reconsider in the future.  While I haven’t yet had the knife fall off the rim of my pocket, once the heft of the knife is put in motion during pocket extraction the clip’s grip on the seam is almost unnoticeable.

Benchmade - Adamas 275 Knife, Plain Drop-Point, Sand Handle
  • HIGH-QUALITY: The D2 stainless steel blade holds an edge exceptionally well. The G10 handle is...
  • WELL-DESIGNED: Benchmade’s AXIS lock is exceptionally strong and fully ambidextrous. The Adamas...

Last update on 2020-06-30 at 08:59 / Affiliate links / Images from Amazon Product Advertising API


For those who prefer a fixed blade, Benchmade co-released a companion blade named the Benchmade - Fixed Adamas 375 Knife, Drop Point Blade with Spine Serrations,... Best Survival Knife, another Seibert Design. Without a folding mechanism, the blade length could exceed four inches without stepping on the toes of local knife laws. At 4.2 inches, and just a hair thicker, the skeletonized handle allows this D2 steel mini-monster to be longer and wider than the 275, but at a weight savings of more than two ounces over its folding brother. Two other obvious differences between the 275 and 375 is that the fixed blade version has no fuller but does contain a wicked serrated saw-back along a majority of the blade. However, a partially serrated main blade is available on the 275 folder.  The stock sheath that comes with the 375 addresses covering the blade quite well, but really needs an effective thumb ramp and and truly tunable compression adjustment in order for the user to customize the security and deploy the blade at will.

As much as I love Benchmade fixed blades, some of their sheaths are nothing short of comical.  I actively seek water adventures so my stable Best Survival Knifeof knives contains many water knives including those from Spyderco, Gerber, Kershaw, and Benchmade.  In the case of the Benchmades, I have their two attempts at fixed blade water knives and while both blades are exceptional in their own right, both sheaths are nearly worthless if you really want your knife to stay put while bouncing off rocks after you’re forcibly removed from your watercraft.  Perhaps thats why Benchmade as abandon its fixed blade water knives and gone with an Axis Lock folder, which I also have one of those as well.

Also Read: Spyderco Bushcraft Survival Knife Review

Both the 275 and 375 have Ceracoated steel. The liquid ceramic hardens into a surprisingly Best Survival Knifedurable protective coating but also minimizes the heat signature of the blade for those cutting jobs you won’t be hearing about. The coatings come in two flavors from Benchmade; black and desert tan, but while the 275 is available with desert tan scales, its blade options can be any color as long as its black. The coating is not an afterthought. As a D2 steel, the higher carbon and lower chromium contents allows rust and staining to take hold easier than with stainless steel options.

The sheath options for both knives are made in either black or tan as well, but both suffer from the same affliction that many Benchmade sheaths suffer, namely being wildly outclassed by the blades they are designed to carry. Frankly, I prefer Leatherman’s MOLLE-compatible sheath. It’s build quality equals the Adamas and it’s additional pockets and straps are welcome additions when needed.

The choice of D2 steel was probably a no-brainer for Benchmade given the intended purpose of these knives. Previous tacticalish BenchmadeBest Survival Knife knives were forged of 154CM steel; a fine choice, but not the best choice. Of course the best choice for steel is always debated, but some agreement is found with steels that should be avoided. My previous Benchmade favorite in the knife space the 375 now occupies was a Nimravus Cub in 154CM. It was a fine little fixed blade, but needed to visit the sharpener more often than I liked. As a softer steel, the Nimravus took an edge quickly, but what if I was too busy using the knife to stop and hone it?  Enter the D2 steel choice.  D2 is an air cooled steel that often Rockwells at or over 60. Some might think the steel is excessively hard for most EDC knives, but it’s well within tolerance for a survival/fighting blade. D2 is also known as a semi-stainless steel meaning its higher chromium content resists rust, corrosion and staining better than other high carbon steels.

Theory Into Practice

The Adamas folder is an exceptional piece of hardware. Everything about the 275 demands respect from the oversized scales to the excessive jimping on every corner, to the substantial crack when the blade locks into place. The grip, the blade, the balance, and the edge are enjoyable to use. I find I carry the 275 Adamas just itching for jobs where it can be flashed into action. Palming the scales gives you superpowers. Pictures don’t do this blade justice. Before I spent time with it, I thought it would be an ungainly, blocky, heavy slab of sharp steel that would be about as much fun to use as chopping ice with a rock.


Well, maybe not that bad, but close. Instead, I was so surprised by how well this massive folding knife melts into my hand. The Adamas makes cutting chores a breeze. The D2 steel is quite edgeworthy and matches the demands of this slicing machine.  Whether fixed or folding, the Adamas knives will fight to the end. A blade can only be overbuilt if it’s underused. I cannot imagine under using anything during a WROL so I’ll be keeping a diamond or two in my pocket and in my pack.

Benchmade - Adamas 275 Knife, Plain Drop-Point, Sand Handle
  • HIGH-QUALITY: The D2 stainless steel blade holds an edge exceptionally well. The G10 handle is...
  • WELL-DESIGNED: Benchmade’s AXIS lock is exceptionally strong and fully ambidextrous. The Adamas...

Last update on 2020-06-30 at 08:59 / Affiliate links / Images from Amazon Product Advertising API

All Photos By Doc Montana

Doc Montana
Written by Doc Montana

Doc honed his survival skills through professional courses, training, and plenty of real-world situations, both intentional and not. Doc lives to mountaineer, rock climb, trail run, hunt, race mountain bikes, ski, hunt, and fish. Doc Montana holds PhD’s in both Science Education and Computer Science and currently teaches at a University in the northern United States. Read his full interview here. Read more of Doc's articles.

8 thoughts on “Benchmade Adamas Knife Review for 2020: Survival Gear Hands-On”

  1. Benchmade is a first rate company. While my son was deployed in Afghanistan he lost his Benchmade knife. I contacted the company on his behalf and they shipped him a replacement knife at a significant discount. Way to go Benchmade!

  2. Excellent review but still expensive however I know if I want quality I have to get out the money. Dave H will Josh be making any more article's soon.

    • The 275 could easily handle batoning. The hinge should be fine since the major forces are applied to the tip-side of the blade. With that said, batoning is a pretty crude use for this jewel of a knife, but I'm sure it wouldn't complain.

      The exposed hex-head pivot bolt allows user touchups of blade play with a small Allen wrench, but I've never needed to adjust my Adamases but have had to send in my Volli because it acquired some blade play and it's pivot bolt is hidden. Benchmade is happy to adjust and sharpen your Benchmade knife for a $5 fee or free if needing warranty service. I sent in my Barrage and they replaced many parts and the scales as well as putting a factory fresh edge back on it. Total cost was about $2 in shipping it to Oregon, USA.

      I've compared Adamas to other higher-end heavy duty folders including those of ZT. The 275 has a traditional blade shape and grind which I prefer. The concave grinds and Ken Onion-inspired serrations of the ZTs just don't feel right to me on a blade this big.

      If the Benchmade 275 is not your final answer in a SHTF, I'd love to know what is.

  3. Perhaps I'm just a Bohemian. I use a large K-bar, a CRKT M16-14T for my folder, my Swiss Army knife, a Gerber Tool, a medium Gerber Axe and a Gerber Gator Brush thinner. Have never had a problem using them for what they're supposed to be used for. My K-bar and CRKT have been all over the world with me in the military. Had the CRKT since 2004 and the K-bar for over 20+ years. I can see the test but what is the "lateral" force required for failure of the 275? The D-2 steel seems to be rather hard (60 RC) for a knife under LATERAL stress. The D-2 is used for planer blades, which are VERY hard. If annealed correctly I suppose it could be good for knife blades but that is not a trait of the steel, it is a stretch. As much as I hear this when referring to firearms, the best bladed tool, is the one that works, for what you're doing. Nice knife for the 375, not sure about the 275, will have to go find one and look. Good post and presentation. Be Well.


Leave a Comment